|
PROJECTS
Dinomania
Designed By: Frank Tompkins
Typical Project Completion Time: 2-4 hours
(does not include drying time)
Tyrannosaurus Rex
Green Stegasaurus
STYROFOAM* Brand Products bring your favorite dinosaurs to life. They're great fun for the classroom, a kid's room, or children's project. For easier assembly, read our tips first, and then follow the step-by-step instructions.
TIPS:
Cutting. A serrated knife, hacksaw, floral knife or X-actoŽ knife easily cut through STYROFOAM Brand Products. Wax the knife blade with an old candle for easier, smoother cuts.
Painting. Spray paint with a water-based paint. Paints containing active solvents may damage foam. (See paint manufacturer's instructions for details.)
Gluing. White craft glue is ideal for STYROFOAM Brand Products. Use florists' picks or toothpicks to hold the pieces together until dried. For faster bonding, try a low temperature glue gun; hot glue guns can be used but they may melt a small portion of the foam. (Please follow manufacturer's safety instructions when operating a glue gun.)
Tyrannosaurus Rex
|
|
|
| MATERIALS NEEDED: |
STYROFOAM Brand Products:
Body: 1- 5" egg
Arms: 6-1-1/2" balls
Legs/Feet: 2-4" eggs, 3- 3" eggs
Tail: 1- 3" ball, 4- 2" balls, 4-1-1/2" balls
Neck/Head: 1- 3" ball, 1- 2" ball, 1- 4" egg, 1-1-1/2" ball
Other Materials:
Wood picks
1- 3/4" doll's eyes, pair
Sharp knife
Glue
Blue felt tip pen (water based)
Spray paint: dark blue, light blue, shocking pink |
|
|
| INSTRUCTIONS: |
| 1. Legs: Position 4" eggs on body (tapered ends down) as if dinosaur is walking. Carve out eggs so they fit snugly against body and glue in place. Glue one 3" egg to each 4" egg (tapered ends down). Cut remaining 3" egg in half lengthwise to form feet; glue on to legs. |
| 2. Tail: Glue together balls for tail, starting with 3" ball and ending with 1-1/2" balls. Glue tail to body; adjust tail as needed to help body stand. |
| 3. Head & Neck: Glue 3" ball onto body, followed by 2" ball. Carve a wedge from end of 4" egg, forming mouth; glue to 2" ball. Cut 1 1/2" ball in half; glue to head for sockets. |
| 4. Arms: Cut wedge out of two 1 1/2" balls, forming hands; glue together three balls for each arm. Attach to 3" ball. |
| 5. Painting: Mask the inside of mouth with tape and carefully paint front of body light blue, shading to white in the center; turn over and paint back side deep blue. Remove tape; carefully paint inside of mouth pink. Draw on nostrils and toe nails with blue felt tip pen. Attach doll's eyes to eye sockets. |
Green Stegosaurus
| MATERIALS NEEDED: |
STYROFOAM Brand Products:
Body: 1- 6" ball
Legs/Feet: 2- 3" eggs, 2- 2" eggs, 6- 1-1/2" balls, 2- 1" balls,2- 2" balls
Neck/Head: 1- 2" egg, 2- 1-1/2" balls
Tail/Fins: 4- 1-1/2" balls, 4- 1" balls, 4-1/2" balls, 6- 3" eggs
Other Materials:
1- 1/2" doll's eyes, pair
Sharp knife
Glue
Spray paint: bright green |
|
|
| INSTRUCTIONS: |
| 1. Back Legs: Position 3" eggs on body, tapered ends down. Carve out eggs so they fit snugly against body and glue in place. Glue one 1-1/2" ball to each egg. |
| 2. Front Legs: Glue 2" eggs to body, following instruction above. Glue 1-1/2" and 1" ball to each egg. |
| 3. Feet: Cut two 2" eggs in half lengthwise; glue to legs. |
| 4. Head & Neck: Whittle top of tapered end of 2" egg into muzzle. Glue together two 1-1/2" balls and 2" egg. Glue neck to body. |
| 5. Tail: Glue together balls for tail, forming a curve. Attach tail to body. |
| 6. Painting: Paint dinosaur body bright green. Attach doll's eyes to head. |
| 7. Fins: Shape tapered end of 3" eggs into a point (optional). Carefully cut six slices from each egg. Paint fins green. Attach fins in pairs, with larger fins on body and smaller fins on tail. |
Tune In to Hands On Crafts for Kids
Krafty Kids: Our Top Tips for Crafting with Kids
|
|
